Exit signs and egress marking
A reading of NFPA 101 7.10 as it is commonly cited on an inspection report. The reading explains the section; it does not certify a building or close a citation. The inspector's finding and the code text govern.
MatchExact section: the decoder holds a reading for NFPA 101 7.10.
Evidence reviewReading prepared from the published text, NFPA 101 2024 edition; readings dated Oct 14, 2026; line-by-line source check pending. Text: NFPA free access (nfpa.org).
AdoptionWhether this standard is in force depends on the state or city that adopts it, and on the edition adopted. The decoder reads it against any of the 51 state records.
What it coversExit signs must be illuminated, visible from the direction of travel, and on emergency power where required.
What usually closes itRepair or replace dark or missing signs; add directional signs where the exit is not visible.
Who can do the workLicensed electrical contractor
Proof at re-inspectionPhotos after repair.
Questions to ask next: which edition and section the finding is written against, in writing; what exactly was observed and what the inspector expects at re-inspection; the correction deadline on the notice. Disagree with the reading of the code? Ask the inspector for the section and edition in writing, then the fire or building official for a written interpretation.