Inspection, testing and maintenance of fire protection systems (NYC Fire Code)
A reading of NYC FC 901.6 as it is commonly cited on an inspection report. The reading explains the section; it does not certify a building or close a citation. The inspector's finding and the code text govern.
MatchExact section: the decoder holds a reading for NYC FC 901.6.
Evidence reviewReading prepared from the published text, NYC FC 2022 codes edition; readings dated Oct 14, 2026; line-by-line source check pending. Text: NYC Construction Codes and Fire Code (nyc.gov).
AdoptionA New York City rule: it applies inside that jurisdiction only.
What it coversFire protection systems are inspected, tested and maintained under the Fire Code and the referenced standards, with records on site for FDNY, and a system out of service requires notice to FDNY and a fire watch where required.
What usually closes itHave the inspection performed by the FDNY-certified person where required; keep the records; notify FDNY of any impairment.
Who can do the workLicensed fire sprinkler contractor (licensing differs by state)
Proof at re-inspectionThe inspection record and the impairment notice.
Questions to ask next: which edition and section the finding is written against, in writing; what exactly was observed and what the inspector expects at re-inspection; the correction deadline on the notice. Disagree with the reading of the code? Ask the inspector for the section and edition in writing, then the fire or building official for a written interpretation.