Supervising station (monitoring) (Chapter 26)
A reading of NFPA 72 26 as it is commonly cited on an inspection report. The reading explains the section; it does not certify a building or close a citation. The inspector's finding and the code text govern.
MatchExact section: the decoder holds a reading for NFPA 72 26.
Evidence reviewReading prepared from the published text, NFPA 72 2025 edition; readings dated Oct 14, 2026; line-by-line source check pending. Text: NFPA free access (nfpa.org).
AdoptionWhether this standard is in force depends on the state or city that adopts it, and on the edition adopted. The decoder reads it against any of the 51 state records.
What it coversWhere monitoring is required, the alarm must reach the supervising station; a trouble on the communicator means the signal path is not proven.
What usually closes itRestore the signal path (both paths for dual-path communicators); confirm with a test signal.
Who can do the workLicensed fire alarm contractor (licensing differs by state), or qualified in-house staff for the tasks NFPA 72 allows
Proof at re-inspectionMonitoring company confirmation of signal receipt.
Questions to ask next: which edition and section the finding is written against, in writing; what exactly was observed and what the inspector expects at re-inspection; the correction deadline on the notice. Disagree with the reading of the code? Ask the inspector for the section and edition in writing, then the fire or building official for a written interpretation.