Building services, including electrical (Chapter 11)
A reading of NFPA 1 11 as it is commonly cited on an inspection report. The reading explains the section; it does not certify a building or close a citation. The inspector's finding and the code text govern.
MatchExact section: the decoder holds a reading for NFPA 1 11.
Evidence reviewReading prepared from the published text, NFPA 1 2024 edition; readings dated Oct 14, 2026; line-by-line source check pending. Text: NFPA free access (nfpa.org).
AdoptionWhether this standard is in force depends on the state or city that adopts it, and on the edition adopted. The decoder reads it against any of the 51 state records.
What it coversExtension cords used as permanent wiring, missing panel covers, blocked panel clearance, open junction boxes and multiplug adapters are the usual electrical findings.
What usually closes itRemove cords and adapters; install outlets where needed; replace covers; clear the panel workspace.
Who can do the workLicensed electrical contractor
Proof at re-inspectionElectrician invoice and photos.
Questions to ask next: which edition and section the finding is written against, in writing; what exactly was observed and what the inspector expects at re-inspection; the correction deadline on the notice. Disagree with the reading of the code? Ask the inspector for the section and edition in writing, then the fire or building official for a written interpretation.